How much does it cost to fix a dripping tap?

A standard tap repair (new washers, O-rings, or ceramic disc cartridge) costs $80–$150 in the Berala area. If the tap body is corroded and needs replacing, a new tap supply and fit is typically $200–$350.

Why is my toilet constantly running?

Usually a worn outlet valve (flush valve seal) at the bottom of the cistern. Water leaks past the seal into the bowl continuously. It's a 20-minute repair that Terry can do on the spot with parts from the van.

Can you replace a toilet suite?

Yes. Terry supplies and installs toilet suites from major Australian brands. A standard back-to-wall toilet replacement including removal of the old unit takes about 1–2 hours.

Tap & Toilet Repairs

A dripping tap wastes up to 20,000 litres a year. A running toilet can waste even more. Terry repairs and replaces taps, mixers, cisterns, and toilet suites across Berala and surrounding suburbs - usually in under an hour.

Tap and toilet problems are the bread and butter of maintenance plumbing. They're small jobs, but they matter - a dripping tap costs money on your water bill and a running toilet can signal a failing cistern valve that'll only get worse.

Terry repairs all tap types: ceramic disc, jumper valve, mixer taps, and wall-mounted units. If a tap is beyond repair (common with cheap builder-grade mixers), he can supply and fit a quality replacement.

For toilets, common issues include a constantly running cistern (usually a worn inlet or outlet valve), a toilet that won't flush properly (blocked jet or low water level), and leaks at the base (failed wax ring or pan collar). Terry carries the most common parts on the van, so most toilet repairs are done in one visit.

Frequently Asked Questions

How much does it cost to fix a dripping tap?: A standard tap repair (new washers, O-rings, or ceramic disc cartridge) costs $80–$150 in the Berala area. If the tap body is corroded and needs replacing, a new tap supply and fit is typically $200–$350.
Why is my toilet constantly running?: Usually a worn outlet valve (flush valve seal) at the bottom of the cistern. Water leaks past the seal into the bowl continuously. It's a 20-minute repair that Terry can do on the spot with parts from the van.
Can you replace a toilet suite?: Yes. Terry supplies and installs toilet suites from major Australian brands. A standard back-to-wall toilet replacement including removal of the old unit takes about 1–2 hours.

Related services

Taps & Toilets across Sydney

Terry covers this service across Berala, Western Sydney and the inner west. A few of the suburbs he works in:

Need help with taps & toilets?

Call Terry on 0415 274 542 - same-day service available for most jobs.

Call 0415 274 542 Request a Callback

NSW Licence L10959 · 40+ years experience